<div class = "text-justify">
Hi guys!
<br><br>
Today I will detail the knee further using pla plates. So here are updates on Project Devil Gundam!
</div>

### Reshaping Pla Plates
<div class = "pull-left"><img src = "https://cdn.steemitimages.com/DQmWiUgUNCfLSzQWxdNERAjQv4oFLKtoCQnbXG2QhSDTTP7/20180407_Project%20Devil%20Gundam%2009.png"></div>
<div class = "pull-right"><img src = "https://cdn.steemitimages.com/DQmWNuWAcWMSUGg48hP3Rw3w6oeDrFSMi5PxcDe8P45Z9wg/20180407_Project%20Devil%20Gundam%2010.png"></div>
<div class = "text-justify">
Since the knee are slightly different I have to make a new one for the other knee. However, I will try to copy the design from the original. I start with drilling a hole that fits the runer then slowly trim off the excess.
</div>

### Further Reshaping
<div class = "pull-left"><img src = "https://cdn.steemitimages.com/DQmZ28jPhXABJ2C8RkZ8Nh1w9uvVXrLFbkE42vLXrYjx1ZZ/20180407_Project%20Devil%20Gundam%2011.png"></div>
<div class = "pull-right"><img src = "https://cdn.steemitimages.com/DQmVqYCAJ9Pun5mJMhVT1ncWsSD98bJHeGtbmGjxuH8eiF9/20180407_Project%20Devil%20Gundam%2012.png"></div>
<div class = "text-justify">
Using the same method I keep trimming the excess pla plate to match the design of the pla plate.
</div>

### Adjusting Custom Panel Lines
<div class = "pull-left"><img src = "https://cdn.steemitimages.com/DQmTQwXPXiUXFBrnbuMqgTvXdRT26utTYkdK8dZmpX3GZib/20180407_Project%20Devil%20Gundam%2013.png"></div>
<div class = "text-justify">
The last details on this side are the custom panel lines. After this I will copy the details onto the other side.
<br><br>
Then add a small pla plate on top of the knee and finally add the last pla plate at an angle on the top of the knee.
<br><br>
I think these details should be enough for the knee. All that's left is to prime to make it easier to check any imperfections before painting the kit.
<br><br>
And so this is my updates for today on this Devil Gundam x Neue Ziel Project. 
<br><br>
Keep on building! Keep on steeming! Have a nice day!
</div>

### Quick access tutorial:
1. [Fixing broken peg](https://steemit.com/gunpla/@devytan/devil-gundam-connecting-arms-and-hands-arm-modification-part-21) using gunpla runer and several tools.
2. [Fixing holes](https://steemit.com/gunpla/@devytan/devil-gundam-connecting-arms-and-hands-arm-modification-part-23) using cement and plastic scraps.
3. [Making C-Joints](https://steemit.com/gunplajagatraya/@devytan/devil-gundam-scratch-building-knee-leg-modification-part-60) using pla plates.