<h4>Ever had bud that smelled and tasted amazing, with a perfectly smooth finish? How about bud that looked alright but smelled like hay, tasted bad, and was really harsh on your throat? Curing may have been responsible!</h4>

<center>![5.JPG](https://cdn.steemitimages.com/DQmc9Kk6QKdeuiwVaDHX9rH8PyMX1DyoknA4GBuY1GN97L6/5.JPG)</center>
<center><i>( all photos by DRutter March 2019 )</i></center>

We serious cannabis gardeners should be upping our curing game with every crop we grow. Improper or insufficient curing can turn well-grown flowers into bunk! Skilled curing can turn mediocre bud into something really enjoyable. When I <a href="https://steemit.com/cannabis/@drutter/steem-og-the-harvest">harvested</a> my Steem OG plant "Ace", I promised to write a full post on how I cure cannabis. 5 days of drying later, and it's time for that post!

<h3>What is curing?</h3>

As I said in <a href="https://steemit.com/cannabis/@drutter/a-steem-og-crumb">my post last night</a>, curing happens to cannabis buds as the plant tissues die, as a result of beneficial microbes. As long as the temperature isn't too warm or too cold, and as long as the cannabis doesn't become completely dry, curing will occur. It isn't a step or procedure we do, it's something natural we just need to let happen. 

<h3>Drying</h3>

Dying also happens naturally to dead plants, including cannabis, and can be accomplished many ways. The way I dry cannabis is by hanging the buds (with trichome-coated 'sugar leaves' intact) on their stems, upside-down, in the dark, at room temperature, with low humidity and a bit of air flow. Details <a href="https://steemit.com/cannabis/@drutter/steem-og-the-harvest">here</a>.

<center>![four tops.JPG](https://cdn.steemitimages.com/DQmZmFJYwW6WUpjdTJ5Ebm8ju4gfuW8tjVka35t7xu6CUqK/four%20tops.JPG)</center>

Mold is one of your enemies, and happens when your buds are too wet, not drying quickly enough, and/or too warm. See my recent <a href="https://steemit.com/cannabis/@drutter/how-to-prevent-mold-on-your-indoor-or-greenhouse-cannabis-plants">post</a> on mold for ways to avoid it in your garden area. My no-touch hang dry method is great for reducing chances of mold contamination, but always be cautious of humidity levels. And remember that larger buds need longer to dry, as their center will still be wet when the outside is dry. Bud dries from the outside in.

<center>![snip.JPG](https://cdn.steemitimages.com/DQmYVYPauLVd2BuvwVaC1MvF2yGfhp8cYnsofTtWw52mikK/snip.JPG)</center>

Your other enemy is over-drying. Because curing is a biological process involving microbes and biochemical changes in the plant tissue, it requires water. You need to avoid <i>too much</i> wetness, but if you dry <i>too quickly</i> or <i>too much</i>, the bud won't have much time to cure. Too much air-flow can dry your bud too fast, as can drying it in an area with extremely low humidity. Technically, we're aiming for a final moisture content of about 10%, depending on intended use.

<h5>Drying just quickly enough to avoid mold issues, but slowly enough for a good long cure, is what you're striving for! You'll either get there by luck, or by honing your skills over many crops, but once you do you'll understand why a proper cure is vital!</h5>

When your buds are drying and curing, you'll smell a hay-like scent being given off. The chlorophyll (which make plants green) and sugars are breaking down, leaving much more pleasant compounds. Curing brings out the terpenes, which give each cannabis strain its distinctive smell, taste, and even medicinal effects. Improperly cured cannabis may look okay, but it often tastes dead, harsh, or like straw. Sometimes insufficiently-cured cannabis still looks very green and fresh (a good thing for spinach, not weed).

<center>![1.JPG](https://cdn.steemitimages.com/DQmTd7h6kEzimtg2njB5EoRvK4YAugCxQDR6fmvAo9isukj/1.JPG)</center>

<h3>Curing "Ace"</h3>

Ace, my Steem OG hybrid female bred by @jonyoudyer, had been drying for 4 days and nights when I decided to move her to jars. For small buds like these, I know they've been hanging long enough when the outsides feel dry and crispy, but the stems are still slightly flexible. For larger buds, I like to dry a bit slower, and wait until the stems are dry enough to break.

Glass is the only material I recommend you allow your buds to touch. It's clean, it doesn't break down, it doesn't interact with cannabis (or solvents), it's cheap. An airtight lid is important.

<center>![2.JPG](https://cdn.steemitimages.com/DQmShSv33s3AHiFieiHbuxsifNPw4PGARhXx8dAboRkaouc/2.JPG)</center>

Holding a stem in one hand, I come at the buds with my snips from below, removing the 'sugar leaf' (small trichome-coated leaves).

Trimming is another important step that is usually done around the harvest/drying/curing stages, but I won't go into it much here. I like to remove all non-medicinal leaves (like the fan leaves) at harvest, leaving nothing on the stems to dry except bud and sugar leaf. When the bud is dry enough to jar, I separate off the sugar leaf. It will finish curing within a couple weeks and then get used to make extracts or edibles.

<center>![3.JPG](https://cdn.steemitimages.com/DQmUnah53yoS2WMkam8H5wwt4RAJFe4U8hWR7kMAAjhYvbw/3.JPG)</center>

If you know me, you know I won't waste a single one of those delicious cannabinoid-filled trichome heads!

After the trimjob, my Steem OG bud looks gorgeous! Symmetrical even in death. What a beauty she was, and still is!

<center>![4.JPG](https://cdn.steemitimages.com/DQmbHRMbcQbp9Ew9PBQdvceL7F1EqRBrYBfHFwKNXC3Mtwy/4.JPG)</center>

That's what good genetics can do with <a href="https://steemit.com/cannabis/@drutter/pink-kush-update">nothing</a> but dirt, water, air, and light! One seed yielded a small pile of bud with a budget near $0. The snippers stuck together after the first clip, and the scent coming off this bud is incredible! Everything I smelled during the growing process, plus a whole new layer of complexity. My mouth watered as I trimmed up the buds, which remain completely untouched except by air. They grew in air, were never handled, I harvested them without touching them, and now they'll go into the jars that way too!

<center>![5.JPG](https://cdn.steemitimages.com/DQmc9Kk6QKdeuiwVaDHX9rH8PyMX1DyoknA4GBuY1GN97L6/5.JPG)</center>

Note the green colour still fading as curing progresses. In another week that will be mostly gone, replaced by a tan, golden, or beige look. Cured bud takes on a dry-but-not-brittle feel, flexible due to the resin content.

<center>![6.jpg](https://cdn.steemitimages.com/DQmXLs6DatRi3uosLMXmYzuGKPc4UkzBoFDfh3mMnKxsLv8/6.jpg)</center>

A hallmark of top shelf bud is that pristine unhandled look of flowers that were cared for properly at every stage.

<center>![7.jpg](https://cdn.steemitimages.com/DQmfSvquY9CxXsJfr1qxvKWUhGhmvJC1tgraimzeUYJmQxN/7.jpg)</center>

To avoid over-drying, the buds need to go into jars from now on, which means they need to come off the stems. A glass jar allows your cannabis to continue the drying process, in a slow and controlled manner. This is when the majority of the curing takes place. If you can draw out that drying process to a few weeks, or even a few months, you'll be rewarded with incredibly tasty, smooth, and potent bud.

<center>![8.JPG](https://cdn.steemitimages.com/DQmWfMS2kxg4ckbgawjmmRHL2ZDs2fSwjfA4hR9kiuSw1pK/8.JPG)</center>

The no-touch method continues, with buds snipped off right into the jar (laid on its side). Store jars in a cool dark place.

<h3>Irradiated weed?</h3>

In many places with 'legalized' cannabis, government regulators insist that cannabis be irradiated, much like produce meant for raw consumption, to reduce microbe levels. This has never been shown to be beneficial. In fact, irradiating cannabis burns off the trichome heads, which is where the cannabinoids and terpenes are. This leaves irradiated cannabis lower in potency and flavour. Also, the death of the microbes means curing can't continue. Because of this, a lot of 'legal' weed tastes dull, burns harsh, and has very little medicinal (or recreational) benefit.

<center>![moooolldd.png](https://cdn.steemitimages.com/DQmQuCcM3K6Mzf9Jkb7uXMSLsPRvJeZyYBs4cpHCC9bwEDr/moooolldd.png)</center>

Curing knowledge has been accumulated and passed along by generations of gardeners. Much of it happened during harsh prohibition times (1923-present), putting it within the so-called 'black market'. But this knowledge isn't harmful, or dangerous, or immoral - in any way! Irradiating cannabis shows the grower is either ignorant of the fact that it burns away trichome heads and stops curing, or wants that to happen.

Always try to know your grower. If possible, <i>be</i> your grower.

<h3>The jar life</h3>

At first, check your jarred cannabis buds often. If there's any condensation on the inside of the jar, your bud is too wet. Leave the lid off until there's no visible dampness (that's a great way to grow mold). 

As the buds cure, 'burp' the jars by opening them regularly. At first you'll want to do this every few hours. Smell the gases coming off the plant matter. Curing is breaking down sugars and chlorophyll, giving off a smell you'll come to recognize. (It's a smell you've smelled before, when opening up baggies of bud grown by a questionable source, and it's often passed off as "dankness' or 'freshness'. You won't fall for poorly-cured weed anymore, though!) As your buds cure, you won't need to burp the jars as often, and eventually you'll want to leave them closed to stop any further moisture loss.

<center>![11.JPG](https://cdn.steemitimages.com/DQmbHFTVdmqyAi8rPuKpW9ojEkkY4J9CkfUodmi8fofgoZ4/11.JPG)</center>

Properly cured cannabis - that is jarred in a cool dark place - can retain much of its freshness and potency for up to a year.

You don't have to do things exactly as I do them. I'm just showing you my methods, in case that helps you. The main thing is understanding what curing is - a natural process that needs proper conditions and time. We mainly need to avoid drying so quickly that curing ends early, or drying so slowly that we get mold. 

Don't be intimidated if it seems complex, because it actually isn't once you get doing it. You can turn cannabis flowers into <i>exceptional</i> dry bud. All you need is knowledge, patience, and the freedom to grow.

<center>![crumb2.jpg](https://cdn.steemitimages.com/DQmNMDntYyptr8p4n5ctQJZYPcEmv3NzEPkq5yjRVvU4vW6/crumb2.jpg)</center>

Frosty nugs are only half the story. If you aren't curing properly, you're likely missing out on a lot of potential flavour, quality, and high!

<h3>Root issue</h3>

<center>![9.JPG](https://cdn.steemitimages.com/DQmUE9zsjrRTEt4wU7aWKZP68ZS1fH4ApeXr9aYwbymJFAh/9.JPG)</center>

The root, having been harvested, washed, and hung to dry like the buds, is now ready to be processed. A quick pass through the grinder yielded a small handful of dry root shavings. 

<center>![10.JPG](https://cdn.steemitimages.com/DQmTWqfJbR9dSBKByanYcuHNBa82RJV2yXRTh852yFRWqBM/10.JPG)</center>

It smells interesting, a bit like fresh carrot. After handling it, I could feel the stickiness of cannabinoids on my fingertips when washing up. There's definitely medicine in these roots! Stay tuned for extraction in a coming post.

Grow (and cure) in peace.
DRutter

<sub>PS: For my <i>other</i> post about cannabis and curing, <a href="https://steemit.com/cannabis/@drutter/gycfg779">click here</a>!</sub>

![banner 2019.jpg](https://cdn.steemitimages.com/DQmcKCWLWdq3gt9MbFKcHWTBX8HSdchbzGRB9PmMypKeoWQ/banner%202019.jpg)