This is part 2 of the motorized Z-Axis build for my laser cutter You can find part 1 here https://steemit.com/maker/@rativiv/making-a-powered-z-axis-table-for-my-k40-laser-cutter-holgamods-kit-part-1 Since it was a sunny day outside, gathered some tools together along with the painted pieces from the other day  Set out the aluminium square tube on the table  Took out the 3d printed part from the kit and put them in place  Dry fit all the parts to make sure that they fit  Grabbed some 5 minute Epoxy  Mixed the 2 part epoxy on an off cut of acrylic  Put epoxy on the ends of each of the 3d printed parts and the pushed the aluminium onto them As we can see, this pushed some of the epoxy out of the end..  Once all 4 corners are done, leave out for 5 to 10 minutes for the epoxy to set  These are the screws that are going to go into the holes in the aluminium, further increasing the strength  First screw done!  Worked my way around, putting each of the screws in  All done with the screws!  Now I drill 2 holes in the mild steel flat bar and straight through the aluminium tube   Using a 4mm tap, I tap both the flat bar and the holes in the tube   Screwed the flat bar to the tube using 10mm length M4 screws   Mounted the stepper motor bracket, using M3 10mm screws - dilling the holes and tapping them into the tubing  Drilled two 4.5mm holes and then tapped each hole to 5mm and then threaded these on - they are 28mm apart, 14mm from the center of the motor   Next I place the lead screws in  And then tighten the grub screws, making sure the lead screw is slightly above the bottom  Once that is done, I grabbed the timing belt (GT2) and then worked out where the holes would need to go in the flat bar  When measuring, I made sure that the motor was as close to the tubing as possible  Drilled and tapped 5mm holes into the flat bar  and nearly done!  As we can see there is a little slack in the belt..  can fix this by moving the stepper motor away from the frame  Next time - utilising this 3mm sheet of aluminium to make the bed!  
| author | rativiv |
|---|---|
| permlink | making-a-powered-z-axis-table-for-my-k40-laser-cutter-holgamods-kit-part-2 |
| category | maker |
| json_metadata | {"tags":["maker","k40","holgamods","z-axis","diy"],"image":["https://cdn.steemitimages.com/DQmW1ZUiNtCeKTw6BHisE1mKZ5Yp64HSTJJueEKx3Yfb1SP/IMG_1699.JPG","https://cdn.steemitimages.com/DQmZnf8jR8fsX1t1BAc5rGHpofRCbhA2ypHJ8GKvK7KyfEy/IMG_1700.JPG","https://cdn.steemitimages.com/DQmSivNsVwKshcWmrqNDUxeAgr4Lk1gwBCxkNtnhDLKJWUU/IMG_1701.JPG","https://cdn.steemitimages.com/DQmRcKDvjqE8zhzrGJWHRkxc5gF1RH8S6b2DKiKQh9Gsojo/IMG_1702.JPG","https://cdn.steemitimages.com/DQmbEXzEsBA91Q3GkszLy7Mftg68p75rSXgGgqxpB2KjHd4/IMG_1703.JPG","https://cdn.steemitimages.com/DQmbx1wFoHVEoJSYGQYpdAmawth9iDRFGuTGLq96Htka7vq/IMG_1704.JPG","https://cdn.steemitimages.com/DQmWfGk36Xu9L9RhPKihNLrFmHSiu9ndhJnemG8xqWHcyGt/IMG_1706.JPG","https://cdn.steemitimages.com/DQmcJ4rRPGe8gQjYZBsvoRLBxnkqTJvi73LrtX4QEeP52L9/IMG_1707.JPG","https://cdn.steemitimages.com/DQmboDxHPLqpnjUMGmYNTq3oUBfFZpg1xT1N3H86jB3QoZE/IMG_1708.JPG","https://cdn.steemitimages.com/DQmTUMqRijrXbtGgYf17oSLa1XyyWA5Yc9nhWrWVJ9UksZH/IMG_1709.JPG","https://cdn.steemitimages.com/DQmdRVoshp5zxrSMLpRyMX3w4mGEWkKuKuSHcxsYyW9SWuZ/IMG_1711.JPG","https://cdn.steemitimages.com/DQmQTvsCrzkvXzuRrb7kR61UNz3a2kDyFDC4inAubpNNDEr/IMG_1712.JPG","https://cdn.steemitimages.com/DQmZ6hbWk8NBWWBvb886P2o5DxHDbiS663LBR4sR7NivnAp/IMG_1713.JPG","https://cdn.steemitimages.com/DQmZr9FwohwmJnh1eKfnUR7Gou6nuGEJxk33p7iEEBS9ez2/IMG_1714.JPG","https://cdn.steemitimages.com/DQmS8krcRwt1wNAHpEAxHVz4imiQZs6c7qg9j7svNogtL34/IMG_1715.JPG","https://cdn.steemitimages.com/DQmf2h1hbRxZuyKrWt54EvQatDyLF75rKrG51fcEmeZqS9z/IMG_1716.JPG","https://cdn.steemitimages.com/DQmX5jwqUdH9nTo9Ne3DGEkEABVdsGLpvM7HAh69Q3bWb17/IMG_1719.JPG","https://cdn.steemitimages.com/DQmRtnyiXMdgpivv4kGDEABUTVCVZ9Unc1menvgd2qBLXNq/IMG_1720.JPG","https://cdn.steemitimages.com/DQmSYFDsyfozSoQA6672s682tmg37MrS3CuP8agRC2sxDwo/IMG_1721.JPG","https://cdn.steemitimages.com/DQmWMhVqz5sbkew3NtRtSaiRTY4rTYcXokAzfDHjcJuvBH7/IMG_1722.JPG","https://cdn.steemitimages.com/DQmXMteGQzc2hXeE3FBvLH6p8YqATMbzhv6arFpxZjBCjRQ/IMG_1723.JPG","https://cdn.steemitimages.com/DQmWaSuZFckk7TdkAdZuZBCBw3AEUyvwRkrTnKCtR3cC7Bw/IMG_1724.JPG","https://cdn.steemitimages.com/DQmTyK5PnbtYRNPtM6qtHarMDkATMVyKSgV2me5cC8YCgMB/IMG_1725.JPG","https://cdn.steemitimages.com/DQmeZFJiXTSG54xmhBnRiAzr3YhwdKPBRvMt9v53LmhthC7/IMG_1726.JPG","https://cdn.steemitimages.com/DQmQNDFJLVodviLwNi7DQdFrd6qMeKRyvPMxxaUzpWFtUnV/IMG_1727.JPG","https://cdn.steemitimages.com/DQmfAdPTDHjtTVFSyQnMvsmCAsYxhWXHSmpsk1piCBny78G/IMG_1728.JPG","https://cdn.steemitimages.com/DQmc8p8w5G8cFopZXyoJs7iTfrDDPy9EpwR7Bcdv6sQaAmP/IMG_1729.JPG","https://cdn.steemitimages.com/DQmYad1kxDZoqKtzK3VHFRrJ1Dfx1iAEvXcPfPtiwJdDusM/IMG_1730.JPG","https://cdn.steemitimages.com/DQmcigFWtTBo115qrUmqYAXZMTGLHCLTUD9rxDshQRwoZgy/IMG_1731.JPG","https://cdn.steemitimages.com/DQmZoXhmMbopV31jpobCdAGyNceuxKkk3dNzGeNV9FvVXeg/IMG_1732.JPG","https://cdn.steemitimages.com/DQmQjGULy44xuxPyjEz27gR2AXjbFbf6GmXvjj8u9GMuGsX/IMG_1733.JPG"],"links":["https://steemit.com/maker/@rativiv/making-a-powered-z-axis-table-for-my-k40-laser-cutter-holgamods-kit-part-1"],"app":"steemit/0.1","format":"markdown"} |
| created | 2018-07-11 08:26:45 |
| last_update | 2018-07-11 08:26:45 |
| depth | 0 |
| children | 5 |
| last_payout | 2018-07-18 08:26:45 |
| cashout_time | 1969-12-31 23:59:59 |
| total_payout_value | 73.430 HBD |
| curator_payout_value | 24.133 HBD |
| pending_payout_value | 0.000 HBD |
| promoted | 0.000 HBD |
| body_length | 5,431 |
| author_reputation | 20,179,312,472,101 |
| root_title | "Making a powered Z-Axis table for my K40 Laser Cutter - Holgamods Kit (Part 2)" |
| beneficiaries | [] |
| max_accepted_payout | 1,000,000.000 HBD |
| percent_hbd | 10,000 |
| post_id | 64,259,085 |
| net_rshares | 46,214,213,993,624 |
| author_curate_reward | "" |
| voter | weight | wgt% | rshares | pct | time |
|---|---|---|---|---|---|
| proctologic | 0 | 19,539,446,512 | 56.95% | ||
| framelalife | 0 | 106,000,811 | 56.95% | ||
| g-dubs | 0 | 119,070,946,567 | 56.95% | ||
| tim-rumford | 0 | 210,137,619 | 56.95% | ||
| trevonjb | 0 | 409,870,706,731 | 10% | ||
| grey580 | 0 | 47,191,607,556 | 56.95% | ||
| cmtzco | 0 | 734,219,332 | 7% | ||
| biglipsmama | 0 | 1,138,505,278 | 56.95% | ||
| tripjammer | 0 | 7,586,215,910 | 10% | ||
| arcange | 0 | 13,521,032,640 | 2% | ||
| fiveboringgames | 0 | 19,547,163,675 | 56.95% | ||
| desmonid | 0 | 1,180,488,912 | 7% | ||
| cryptohustlin | 0 | 6,028,262,757 | 7% | ||
| raphaelle | 0 | 1,440,486,172 | 2% | ||
| jasonmiller2134 | 0 | 244,669,095 | 56.95% | ||
| transhuman | 0 | 5,671,009,853 | 56.95% | ||
| bofadeez | 0 | 312,769,204 | 7% | ||
| zentat | 0 | 246,624,156 | 56.95% | ||
| sethlinson | 0 | 1,195,360,354 | 56.95% | ||
| eileenbeach | 0 | 8,058,077,617 | 7% | ||
| jimjam1210 | 0 | 2,941,701,783 | 56.95% | ||
| kralizec | 0 | 15,472,080,885 | 56.95% | ||
| lloyddavis | 0 | 955,996,587 | 2% | ||
| drakmin | 0 | 22,581,974,993 | 56.95% | ||
| geggi632 | 0 | 159,448,458 | 56.95% | ||
| decebal2dac | 0 | 3,735,192,228 | 56.95% | ||
| sqube | 0 | 1,631,466,009 | 56.95% | ||
| steemcollator | 0 | 26,194,396,408 | 56.95% | ||
| spurious-claims | 0 | 1,365,225,310 | 56.95% | ||
| steve123 | 0 | 73,483,701 | 56.95% | ||
| marcosespes1 | 0 | 2,416,399,823 | 56.95% | ||
| shaunmza | 0 | 17,008,626,300 | 90% | ||
| eaposztrof | 0 | 1,446,316,081 | 56.95% | ||
| gmedley | 0 | 935,237,836 | 5% | ||
| abso | 0 | 440,119,942 | 56.95% | ||
| pbock | 0 | 11,127,217,713 | 100% | ||
| nicnicy | 0 | 5,510,497,051 | 56.95% | ||
| businesswri | 0 | 1,078,478,078 | 56.95% | ||
| treebuilder | 0 | 5,905,665,224 | 56.95% | ||
| brains1ck | 0 | 891,624,662 | 56.95% | ||
| nuad01 | 0 | 497,224,462 | 56.95% | ||
| adamhole | 0 | 16,626,130,032 | 10% | ||
| thatsweeneyguy | 0 | 5,158,686,042 | 50% | ||
| fatboyjames | 0 | 63,040,473 | 10% | ||
| mrright | 0 | 7,459,620,670 | 56.95% | ||
| outerground | 0 | 20,789,875,822 | 56.95% | ||
| olgavdovskikh | 0 | 331,523,962 | 56.95% | ||
| sqamemal | 0 | 1,952,586,453 | 100% | ||
| frankydoodle | 0 | 5,457,610,120 | 56.95% | ||
| itchykitten | 0 | 7,211,128,953 | 56.95% | ||
| kishan | 0 | 462,025,499 | 56.95% | ||
| thelordsfinest | 0 | 508,425,396 | 10% | ||
| vannfrik | 0 | 17,390,315,930 | 56.95% | ||
| joklahoma | 0 | 2,778,549,972 | 56.95% | ||
| vizualsamuri | 0 | 9,977,703,131 | 56.95% | ||
| kingyus | 0 | 459,840,508 | 56.95% | ||
| shawnfishbit | 0 | 132,979,768 | 56.95% | ||
| opinizeunltd | 0 | 11,306,083,665 | 56.95% | ||
| ryanblue7s | 0 | 5,178,348,804 | 10% | ||
| jiujitsu | 0 | 131,908,783,665 | 56.95% | ||
| agoric.systems | 0 | 863,123,748 | 56.95% | ||
| realcodysimon | 0 | 5,518,400,409 | 56.95% | ||
| senor | 0 | 1,065,753,543 | 56.95% | ||
| mikegun | 0 | 11,040,831,491 | 56.95% | ||
| epikcoin | 0 | 568,967,221 | 56.95% | ||
| deemarshall | 0 | 12,044,689,623 | 56.95% | ||
| abdulrehman | 0 | 247,140,299 | 56.95% | ||
| natra | 0 | 17,806,653,916 | 56.95% | ||
| reloadbeatbox | 0 | 911,981,938 | 10% | ||
| joey-cryptoboy | 0 | 705,591,879 | 10% | ||
| wishmaiden | 0 | 1,391,767,758 | 56.95% | ||
| booster | 0 | 7,148,464,201,005 | 17.14% | ||
| ragnartheking | 0 | 205,844,388 | 56.95% | ||
| hausbau | 0 | 463,043,168 | 56.95% | ||
| roncoejr | 0 | 6,266,704,450 | 10% | ||
| kenhudoy | 0 | 4,913,461,533 | 56.95% | ||
| mustafeez | 0 | 333,409,361 | 56.95% | ||
| satfit | 0 | 173,871,105 | 56.95% | ||
| beyondthecrypto | 0 | 222,025,355 | 5% | ||
| agr8buzz | 0 | 16,539,146,377 | 56.95% | ||
| freecreative | 0 | 63,386,973 | 56.95% | ||
| truth-be-told | 0 | 70,621,857 | 56.95% | ||
| philip.willemse | 0 | 332,662,767 | 56.95% | ||
| drbh | 0 | 409,734,882 | 56.95% | ||
| funfacts | 0 | 124,980,943 | 56.95% | ||
| iamnotageek | 0 | 1,829,278,493 | 56.95% | ||
| cryptojake | 0 | 1,449,429,873 | 56.95% | ||
| imredryan | 0 | 803,668,974 | 10% | ||
| crypto2day | 0 | 28,998,305,760 | 56.95% | ||
| mrslauren | 0 | 31,593,160,137 | 56.95% | ||
| oregonpop | 0 | 72,981,294,266 | 56.95% | ||
| boucaron | 0 | 8,234,773,336 | 100% | ||
| cedpete389 | 0 | 158,706,938 | 1% | ||
| onza | 0 | 643,535,037 | 56.95% | ||
| allcapsonezero | 0 | 1,661,171,532 | 5% | ||
| minnowpond | 0 | 37,187,347,801 | 7% | ||
| reborn99 | 0 | 338,796,384 | 56.95% | ||
| animapaddy | 0 | 318,288,413 | 56.95% | ||
| minnowpond1 | 0 | 947,768,176 | 7% | ||
| mezmerizer9 | 0 | 327,475,878 | 56.95% | ||
| abenike | 0 | 971,195,601 | 56.95% | ||
| helmirenggrik | 0 | 110,127,170 | 56.95% | ||
| mmagreat | 0 | 1,236,392,097 | 56.95% | ||
| thelifestyler | 0 | 3,202,575,430 | 56.95% | ||
| kyawsantun | 0 | 2,379,134,757 | 56.95% | ||
| ladyrednails | 0 | 6,393,998,194 | 56.95% | ||
| madcool | 0 | 106,734,857 | 56.95% | ||
| mamata | 0 | 331,938,734 | 56.95% | ||
| ronnybat | 0 | 314,630,565 | 56.95% | ||
| ahmad.rezk | 0 | 335,714,719 | 56.95% | ||
| omrii | 0 | 317,324,079 | 56.95% | ||
| seyico2011 | 0 | 65,454,565 | 56.95% | ||
| simplygorgeous | 0 | 265,684,102 | 56.95% | ||
| jonasthomas | 0 | 421,744,481 | 56.95% | ||
| amlehtnewo | 0 | 323,506,911 | 56.95% | ||
| showtime | 0 | 469,794,165 | 56.95% | ||
| pickled | 0 | 5,023,570,138 | 56.95% | ||
| bitfook | 0 | 824,120,688 | 10% | ||
| finesse203 | 0 | 1,373,451,584 | 56.95% | ||
| tonimarco | 0 | 21,695,063,812 | 56.95% | ||
| steemdrivingman | 0 | 868,928,680 | 56.95% | ||
| aek081969 | 0 | 460,342,726 | 56.95% | ||
| enjgold | 0 | 1,379,139,631 | 10% | ||
| tomtom87 | 0 | 319,757,496 | 56.95% | ||
| saini11 | 0 | 94,981,407 | 56.95% | ||
| hellmerlin | 0 | 312,030,117 | 56.95% | ||
| youngfuego | 0 | 133,123,127 | 56.95% | ||
| andysmancave | 0 | 633,289,098 | 56.95% | ||
| treasuregnome | 0 | 5,741,908,404 | 56.95% | ||
| frontrunner | 0 | 21,248,157,980 | 56.95% | ||
| ryanarcher | 0 | 102,671,202 | 56.95% | ||
| mustafa4101996 | 0 | 311,299,103 | 56.95% | ||
| maxbullion | 0 | 97,518,884,341 | 56.95% | ||
| skyhooks | 0 | 3,051,536,968 | 56.95% | ||
| upvoted | 0 | 225,677,765 | 56.95% | ||
| ketikasharma | 0 | 313,897,087 | 56.95% | ||
| dorthmaen | 0 | 541,836,997 | 56.95% | ||
| gellany | 0 | 310,621,567 | 56.95% | ||
| bakhtiarzehri | 0 | 738,662,148 | 56.95% | ||
| scorpionking | 0 | 280,261,837 | 56.95% | ||
| coincutie | 0 | 928,515,605 | 10% | ||
| ganandoenbtc | 0 | 323,086,097 | 56.95% | ||
| eosint | 0 | 501,140,435 | 56.95% | ||
| hello.totoro | 0 | 4,168,055,528 | 10% | ||
| voltsrage | 0 | 330,202,976 | 56.95% | ||
| joulia | 0 | 325,398,637 | 56.95% | ||
| mightywarrior | 0 | 160,922,199 | 56.95% | ||
| saadithya | 0 | 431,862,304 | 56.95% | ||
| jefpatat | 0 | 55,977,018,701 | 100% | ||
| tastytrade | 0 | 333,127,630 | 56.95% | ||
| buildawhale | 0 | 15,607,839,302,317 | 20.98% | ||
| merosalah | 0 | 109,544,376 | 56.95% | ||
| ravenrillay | 0 | 311,734,113 | 56.95% | ||
| benjy87 | 0 | 467,050,061 | 56.95% | ||
| belgarath | 0 | 17,133,519,918 | 56.95% | ||
| failshub | 0 | 68,701,823 | 56.95% | ||
| alidervash | 0 | 632,249,804 | 56.95% | ||
| hoxly | 0 | 2,286,548,913 | 6.72% | ||
| podanrj | 0 | 5,764,507,000 | 45% | ||
| corganmusic | 0 | 4,936,431,905 | 56.95% | ||
| coingyan | 0 | 102,473,200 | 56.95% | ||
| nakedtrader | 0 | 130,110,330 | 56.95% | ||
| zuhrareza | 0 | 314,006,747 | 56.95% | ||
| whitedynasty | 0 | 2,200,930,385 | 10% | ||
| phuresh | 0 | 203,798,909 | 56.95% | ||
| videogeek | 0 | 833,431,757 | 56.95% | ||
| s10 | 0 | 464,443,334 | 56.95% | ||
| derkon | 0 | 11,986,196,547 | 56.95% | ||
| da-primate | 0 | 317,953,896 | 56.95% | ||
| makerhacks | 0 | 84,602,937,214 | 50% | ||
| sneaky-ninja | 0 | 2,688,504,758,185 | 21.77% | ||
| hillstech | 0 | 322,892,826 | 56.95% | ||
| amanda46536 | 0 | 308,101,585 | 56.95% | ||
| jaforce | 0 | 687,550,028 | 10% | ||
| travelingdiva | 0 | 324,305,475 | 56.95% | ||
| dbooster | 0 | 1,915,593,706 | 10% | ||
| whenhowwho | 0 | 648,547,590 | 10% | ||
| ianfreeman | 0 | 343,936,848 | 56.95% | ||
| chucknasty | 0 | 333,452,941 | 56.95% | ||
| arunavabiswas | 0 | 315,155,372 | 56.95% | ||
| nithog | 0 | 516,411,717 | 100% | ||
| lawyerup | 0 | 11,126,702,514 | 56.95% | ||
| liberta | 0 | 1,181,407,664 | 56.95% | ||
| jfkenndy | 0 | 2,068,142,614 | 56.95% | ||
| onhiatus | 0 | 106,725,220 | 10% | ||
| smartsteem | 0 | 4,463,849,803,758 | 3.96% | ||
| drmake | 0 | 110,650,155,031 | 100% | ||
| rikip94 | 0 | 200,044,865 | 56.95% | ||
| bjjworldtraveler | 0 | 11,423,590,452 | 56.95% | ||
| ering | 0 | 1,485,242,319 | 7% | ||
| ant884 | 0 | 12,259,552,711 | 56.95% | ||
| idontgnu | 0 | 109,040,357 | 12% | ||
| harmonicliving | 0 | 1,836,750,335 | 7% | ||
| sammyb | 0 | 3,215,015,765 | 7% | ||
| silasdavid | 0 | 524,885,845 | 56.95% | ||
| reisronddewereld | 0 | 3,454,018,395 | 56.95% | ||
| cryptoclick | 0 | 5,087,398,340 | 56.95% | ||
| crypt0boy | 0 | 327,189,394 | 56.95% | ||
| futuredigicoin | 0 | 259,406,727 | 56.95% | ||
| schulbz | 0 | 617,162,218 | 7% | ||
| steemmakers | 0 | 36,055,387,147 | 100% | ||
| genya.kharitonov | 0 | 330,071,413 | 56.95% | ||
| mitchadventures | 0 | 1,369,487,651 | 10% | ||
| co-op.blogs | 0 | 320,902,763 | 56.95% | ||
| emas-jiujitsu | 0 | 11,204,887,512 | 56.95% | ||
| eaglespirit | 0 | 40,958,252,980 | 56.95% | ||
| freemon | 0 | 335,745,157 | 56.95% | ||
| billibong | 0 | 260,119,999 | 56.95% | ||
| sahertanveer | 0 | 335,853,410 | 56.95% | ||
| vlasmp | 0 | 318,623,017 | 56.95% | ||
| kofibeatz | 0 | 867,471,985 | 56.95% | ||
| upmewhale | 0 | 4,427,805,605,331 | 10.93% | ||
| pllo3llo | 0 | 844,248,133 | 56.95% | ||
| graytor | 0 | 336,738,923 | 56.95% | ||
| ceyksparrow | 0 | 333,037,539 | 56.95% | ||
| thedrayness | 0 | 924,525,191 | 7% | ||
| thevark | 0 | 2,974,638,858 | 7% | ||
| guangzhoulife | 0 | 151,898,184 | 12% | ||
| anjkara | 0 | 21,020,706,284 | 56.95% | ||
| drdeepdick | 0 | 87,743,194 | 7% | ||
| voyagesofcarla2 | 0 | 218,586,825 | 6% | ||
| unholyleaf | 0 | 1,102,895,853 | 7% | ||
| shamrock017 | 0 | 363,301,126 | 7% | ||
| cjd | 0 | 137,335,855 | 12% | ||
| salvadorcrg | 0 | 567,670,303 | 50% | ||
| protomar | 0 | 323,401,051 | 56.95% | ||
| cryptotash101 | 0 | 2,738,145,381 | 56.95% | ||
| vivianka | 0 | 459,058,179 | 56.95% | ||
| kaking | 0 | 254,158,175 | 50% | ||
| numberofthingz | 0 | 4,435,685,566 | 10% | ||
| drguy | 0 | 4,070,552,514 | 7% | ||
| mirabdullah | 0 | 326,915,132 | 56.95% | ||
| dashdipak | 0 | 317,403,007 | 56.95% | ||
| stonechaisson | 0 | 338,909,912 | 56.95% | ||
| zulbahri | 0 | 625,431,182 | 56.95% | ||
| charliekerper | 0 | 82,032,390 | 5% | ||
| blockchaindaily | 0 | 4,108,957,896 | 7% | ||
| btcbaby | 0 | 314,689,480 | 56.95% | ||
| enkel | 0 | 342,865,848 | 56.95% | ||
| ivan-g | 0 | 651,327,808 | 50% | ||
| terrenceh | 0 | 1,639,922,582 | 10% | ||
| randumb | 0 | 117,539,772 | 10% | ||
| osere | 0 | 319,839,671 | 56.95% | ||
| flash4yard | 0 | 1,808,669,282 | 100% | ||
| ashmodz | 0 | 2,016,613,732 | 10% | ||
| dailyhouston | 0 | 252,657,154 | 41.35% | ||
| brunoaco91 | 0 | 333,158,140 | 56.95% | ||
| fturner19 | 0 | 121,747,310 | 10% | ||
| yamcha | 0 | 1,401,381,252 | 10% | ||
| hamza77 | 0 | 315,378,087 | 56.95% | ||
| rativiv | 0 | 2,316,428,931 | 10% | ||
| adzrobinson | 0 | 7,722,542,336 | 10% | ||
| jguzman394 | 0 | 2,103,296,253 | 56.95% | ||
| jackdub | 0 | 4,736,807,248 | 100% | ||
| fantomcee | 0 | 329,581,158 | 56.95% | ||
| historyfromworld | 0 | 330,646,142 | 56.95% | ||
| edgarr | 0 | 3,865,889,728 | 10% | ||
| mickeyvera | 0 | 269,773,407 | 56.95% | ||
| nicholasjohn | 0 | 244,109,138 | 56.95% | ||
| nenafit | 0 | 539,858,480 | 10% | ||
| truce | 0 | 879,191,902 | 10% | ||
| arantuil | 0 | 61,215,332 | 10% | ||
| rawn | 0 | 3,450,340,764 | 10% | ||
| mimidee74 | 0 | 902,406,267 | 10% | ||
| dmxmaster | 0 | 612,098,432 | 100% | ||
| hafizalam5556 | 0 | 326,421,049 | 56.95% | ||
| thomasbrown | 0 | 6,373,372,603 | 10% | ||
| umich | 0 | 949,546,704 | 12% | ||
| nova-nazirah | 0 | 323,092,111 | 56.95% | ||
| kurtringimages | 0 | 313,853,675 | 56.95% | ||
| pasie15 | 0 | 1,750,139,753 | 10% | ||
| sabarniati.aceh | 0 | 337,956,727 | 56.95% | ||
| alfanso | 0 | 1,230,225,270,216 | 42.77% | ||
| julypalma | 0 | 512,216,649 | 10% | ||
| therising | 0 | 6,659,651,457,104 | 16.5% | ||
| lovethedrake | 0 | 141,161,906 | 100% | ||
| andrecarothers | 0 | 16,004,860,815 | 7% | ||
| thesteemhouse | 0 | 1,597,024,613 | 50% | ||
| karega | 0 | 4,806,589,040 | 10% | ||
| theceltictraders | 0 | 1,025,624,245 | 10% | ||
| johhnnyturbo20 | 0 | 1,651,738,505 | 10% | ||
| eloniy | 0 | 413,345,087 | 56.95% | ||
| willjj85 | 0 | 230,492,367 | 10% | ||
| nauman944 | 0 | 341,733,623 | 56.95% | ||
| ocxie | 0 | 287,816,261 | 56.95% | ||
| battlemountain2k | 0 | 11,107,303,050 | 56.95% | ||
| lordgod | 0 | 326,217,691,146 | 5% | ||
| saveoceansbot | 0 | 252,851,004 | 41.35% | ||
| plgonzalezrx8 | 0 | 209,300,001 | 12% | ||
| oceansbot | 0 | 254,204,299 | 41.35% | ||
| zappl-lottery | 0 | 539,187,598 | 56.95% | ||
| manfaluthi | 0 | 301,777,415 | 56.95% | ||
| rightwing670 | 0 | 2,464,893,141 | 10% | ||
| tehmi | 0 | 313,797,893 | 56.95% | ||
| minnowwhale | 0 | 253,005,355 | 41.35% | ||
| octopusbot | 0 | 252,734,375 | 41.35% | ||
| saveoceans | 0 | 252,718,714 | 41.35% | ||
| photobomber | 0 | 333,410,280 | 56.95% | ||
| realprofitbot | 0 | 252,736,058 | 41.35% | ||
| jellyfishbot | 0 | 252,737,634 | 41.35% | ||
| starfishbot | 0 | 252,720,027 | 41.35% | ||
| aungmyinthu | 0 | 339,081,040 | 56.95% | ||
| electricswine | 0 | 1,571,275,467 | 50% | ||
| spacebot | 0 | 252,585,854 | 41.35% | ||
| turtlebot | 0 | 252,585,854 | 41.35% | ||
| seabirds | 0 | 252,585,854 | 41.35% | ||
| speedydolphin | 0 | 252,585,854 | 41.35% | ||
| oceanshark | 0 | 252,585,854 | 41.35% | ||
| mermaidbot | 0 | 252,585,854 | 41.35% | ||
| oceanwhale | 0 | 1,450,219,306,439 | 41.35% | ||
| cutedolphin | 0 | 252,585,854 | 41.35% | ||
| spiderbot | 0 | 252,585,854 | 41.35% | ||
| snailbot | 0 | 252,585,854 | 41.35% | ||
| smartdolphin | 0 | 252,585,854 | 41.35% | ||
| minnowangel | 0 | 252,585,854 | 41.35% | ||
| monsterbot | 0 | 252,585,854 | 41.35% | ||
| flashbot | 0 | 252,585,854 | 41.35% | ||
| penguinbot | 0 | 252,585,854 | 41.35% | ||
| sparkey | 0 | 252,585,854 | 41.35% | ||
| menandyjose | 0 | 88,816,043 | 20.67% | ||
| soundworks | 0 | 206,123,741 | 9.29% | ||
| lagtv | 0 | 3,066,842,955 | 10% | ||
| taisa.gallery | 0 | 332,373,361 | 56.95% | ||
| merleeyq | 0 | 325,776,295 | 56.95% | ||
| beanbot | 0 | 254,209,864 | 41.35% | ||
| smileybot | 0 | 254,209,864 | 41.35% | ||
| bethewhale | 0 | 254,209,864 | 41.35% | ||
| skywhale | 0 | 254,209,864 | 41.35% | ||
| unicornwhale | 0 | 254,209,864 | 41.35% | ||
| upmedolphin | 0 | 254,192,950 | 41.35% | ||
| cutewhale | 0 | 254,192,950 | 41.35% | ||
| speedywhale | 0 | 254,192,950 | 41.35% | ||
| bigobot | 0 | 254,192,950 | 41.35% | ||
| mlgcrypto | 0 | 6,377,787,425 | 56.95% | ||
| deusx | 0 | 331,746,546 | 56.95% | ||
| zip512 | 0 | 1,383,339,433 | 7% | ||
| arithmatic | 0 | 341,965,155 | 56.95% | ||
| gnoori | 0 | 336,206,846 | 56.95% | ||
| trapcation | 0 | 3,574,093,783 | 10% | ||
| lilcryptita | 0 | 595,558,523 | 10% | ||
| henry.englert | 0 | 316,821,173 | 100% | ||
| vanoss | 0 | 5,066,091,878 | 10% | ||
| duval904 | 0 | 1,805,501,666 | 10% | ||
| lifenow | 0 | 4,030,882,095 | 10% | ||
| blockfreak | 0 | 1,278,459,115 | 10% | ||
| trevon | 0 | 27,128,126,576 | 10% | ||
| hiatus | 0 | 1,411,929,031 | 10% | ||
| ethnow | 0 | 29,462,313,222 | 56.95% | ||
| katcat | 0 | 909,419,078 | 10% | ||
| morethancrypto | 0 | 10,862,932,414 | 10% | ||
| genre | 0 | 899,291,235 | 10% | ||
| hers | 0 | 853,227,876 | 10% | ||
| microoo | 0 | 597,107,974 | 50% | ||
| lifefun | 0 | 1,221,798,976 | 10% | ||
| inkasatorrr | 0 | 1,669,322,995 | 10% | ||
| wordofmouth | 0 | 219,579,605 | 5% | ||
| retrospect | 0 | 979,861,658 | 10% | ||
| steemitsarah | 0 | 965,759,513 | 10% | ||
| ghost-train | 0 | 940,822,887 | 10% | ||
| space-smx | 0 | 527,601,206 | 10% | ||
| voter000 | 0 | 14,245,431,847 | 7% |
<p>This post has received a 17.15 % upvote from @booster thanks to: @rativiv.</p>
| author | booster |
|---|---|
| permlink | re-rativiv-making-a-powered-z-axis-table-for-my-k40-laser-cutter-holgamods-kit-part-2-20180711t120248719z |
| category | maker |
| json_metadata | {"tags":["maker"],"app":"drotto/0.0.5pre3"} |
| created | 2018-07-11 12:04:57 |
| last_update | 2018-07-11 12:04:57 |
| depth | 1 |
| children | 0 |
| last_payout | 2018-07-18 12:04:57 |
| cashout_time | 1969-12-31 23:59:59 |
| total_payout_value | 0.000 HBD |
| curator_payout_value | 0.000 HBD |
| pending_payout_value | 0.000 HBD |
| promoted | 0.000 HBD |
| body_length | 82 |
| author_reputation | 68,767,115,776,562 |
| root_title | "Making a powered Z-Axis table for my K40 Laser Cutter - Holgamods Kit (Part 2)" |
| beneficiaries | [] |
| max_accepted_payout | 1,000,000.000 HBD |
| percent_hbd | 10,000 |
| post_id | 64,278,039 |
| net_rshares | 0 |
You got a 41.35% upvote from @oceanwhale With 35+ Bonus Upvotes courtesy of @rativiv! DelegateĀ <a title="This link will take you away from steemit.com" href="https://steembottracker.com/delegation.html?delegatee=oceanwhale" rel="noopener">us</a>Ā Steem Power & getĀ <strong>100%</strong>daily rewards Payout!<a title="This link will take you away from steemit.com" href="https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=oceanwhale&vesting_shares=20%20SP" rel="noopener"> 20 SP</a>, <a title="This link will take you away from steemit.com" href="https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=oceanwhale&vesting_shares=50%20SP" rel="noopener">50</a>, <a title="This link will take you away from steemit.com" href="https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=oceanwhale&vesting_shares=75%20SP" rel="noopener">75</a>, <a title="This link will take you away from steemit.com" href="https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=oceanwhale&vesting_shares=100%20SP" rel="noopener">100</a>, <a title="This link will take you away from steemit.com" href="https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=oceanwhale&vesting_shares=150%20SP" rel="noopener">150</a>, <a title="This link will take you away from steemit.com" href="https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=oceanwhale&vesting_shares=200%20SP" rel="noopener">200</a>, <a title="This link will take you away from steemit.com" href="https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=oceanwhale&vesting_shares=300%20SP" rel="noopener">300</a>, <a title="This link will take you away from steemit.com" href="https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=oceanwhale&vesting_shares=500%20SP" rel="noopener">500</a>,<a title="This link will take you away from steemit.com" href="https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=oceanwhale&vesting_shares=1000%20SP" rel="noopener">1000</a>Ā orĀ <a title="This link will take you away from steemit.com" href="https://steembottracker.com/delegation.html?delegatee=oceanwhale" rel="noopener">Fill in any amount of SP</a> EarnĀ <a href="https://steemit.com/oceanwhale/@oceanwhale/earn-upto-1-sbd-per-1000-sp-delegation-or-oceanwhale-bot">1.25 SBD Per 1000 SP</a>Ā |Ā <a title="This link will take you away from steemit.com" href="https://discord.gg/6APfrQ6" rel="noopener">Discord server</a>
| author | oceanwhale |
|---|---|
| permlink | re-rativiv-making-a-powered-z-axis-table-for-my-k40-laser-cutter-holgamods-kit-part-2-20180713t125044760z |
| category | maker |
| json_metadata | {"app":"postpromoter/2.0.0"} |
| created | 2018-07-13 12:51:09 |
| last_update | 2018-07-13 12:51:09 |
| depth | 1 |
| children | 0 |
| last_payout | 2018-07-20 12:51:09 |
| cashout_time | 1969-12-31 23:59:59 |
| total_payout_value | 0.000 HBD |
| curator_payout_value | 0.000 HBD |
| pending_payout_value | 0.000 HBD |
| promoted | 0.000 HBD |
| body_length | 2,616 |
| author_reputation | 3,006,463,059,607 |
| root_title | "Making a powered Z-Axis table for my K40 Laser Cutter - Holgamods Kit (Part 2)" |
| beneficiaries | [] |
| max_accepted_payout | 1,000,000.000 HBD |
| percent_hbd | 10,000 |
| post_id | 64,530,523 |
| net_rshares | 0 |
 Sneaky Ninja Attack! You have just been defended with a 21.77% upvote! I was summoned by @rativiv. I have done their bidding and now I will vanish... woosh A portion of the proceeds from your bid was used in support of youarehope and tarc. [Abuse Policy]( https://steemit.com/steemit/@sneaky-ninja/new-sneaky-ninja-abuse-policy-must-read-for-all-users) [Rules]( https://steemit.com/steemit/@sneaky-ninja/sneaky-ninja-reminder-of-rules) [How to use Sneaky Ninja]( https://steemit.com/steemit/@sneaky-ninja/reminder-how-to-use-sneaky-ninja) [How it works]( https://steemit.com/steemit/@sneaky-ninja/sneaky-ninja-reminder-of-how-he-works-vote-worth-usd160-now) [Victim of grumpycat?](https://steemit.com/we-resist/@firedream/resistance-started)
| author | sneaky-ninja |
|---|---|
| permlink | re-rativiv-making-a-powered-z-axis-table-for-my-k40-laser-cutter-holgamods-kit-part-2-20180713t103430136z |
| category | maker |
| json_metadata | {"app":"postpromoter/2.0.0"} |
| created | 2018-07-13 10:34:30 |
| last_update | 2018-07-13 10:34:30 |
| depth | 1 |
| children | 0 |
| last_payout | 2018-07-20 10:34:30 |
| cashout_time | 1969-12-31 23:59:59 |
| total_payout_value | 0.000 HBD |
| curator_payout_value | 0.000 HBD |
| pending_payout_value | 0.000 HBD |
| promoted | 0.000 HBD |
| body_length | 874 |
| author_reputation | 6,929,108,306,933 |
| root_title | "Making a powered Z-Axis table for my K40 Laser Cutter - Holgamods Kit (Part 2)" |
| beneficiaries | [] |
| max_accepted_payout | 1,000,000.000 HBD |
| percent_hbd | 10,000 |
| post_id | 64,517,832 |
| net_rshares | 0 |
<div class='pull-right'><center><a href='http://www.steemmakers.com'><img src='https://www.steemmakers.com/img/comment_logo_makers.png' /></a></center></div><b>Congratulations</b> This post has been upvoted by SteemMakers. We are a community-based project that aims to support makers and DIYers on the blockchain in every way possible. <br/><br/>Join our <a href='https://discord.gg/EFGbRuW'>Discord Channel</a> to connect with us and nominate your own or somebody else's posts in our review channel.<br/><br/><b>Help us to reward you for making it !</b> Join <a href='https://www.steemmakers.com/#/Trail'>our voting trail</a> or <a href='https://www.steemmakers.com/#/Delegation'>delegate steem power</a> to the community account. <br/><br/>Your post is also presented on the community website <a href='http://www.steemmakers.com'>www.steemmakers.com</a> where you can find other selected content. <br/><br/>If you like our work, please consider upvoting this comment to support the growth of our community. Thank you.
| author | steemmakers |
|---|---|
| permlink | re-rativiv-making-a-powered-z-axis-table-for-my-k40-laser-cutter-holgamods-kit-part-2-20180711t130754558z |
| category | maker |
| json_metadata | "" |
| created | 2018-07-11 13:07:51 |
| last_update | 2018-07-11 13:07:51 |
| depth | 1 |
| children | 0 |
| last_payout | 2018-07-18 13:07:51 |
| cashout_time | 1969-12-31 23:59:59 |
| total_payout_value | 0.000 HBD |
| curator_payout_value | 0.000 HBD |
| pending_payout_value | 0.000 HBD |
| promoted | 0.000 HBD |
| body_length | 1,019 |
| author_reputation | 1,907,312,584,548 |
| root_title | "Making a powered Z-Axis table for my K40 Laser Cutter - Holgamods Kit (Part 2)" |
| beneficiaries | [] |
| max_accepted_payout | 1,000,000.000 HBD |
| percent_hbd | 10,000 |
| post_id | 64,284,914 |
| net_rshares | 0 |
You got a 10.93% upvote from @upmewhale courtesy of @rativiv! Earn 100% earning payout by delegating SP to @upmewhale. Visit http://www.upmewhale.com for details!
| author | upmewhale |
|---|---|
| permlink | re-rativiv-making-a-powered-z-axis-table-for-my-k40-laser-cutter-holgamods-kit-part-2-20180713t104405191z |
| category | maker |
| json_metadata | {"app":"postpromoter/2.0.0"} |
| created | 2018-07-13 10:44:06 |
| last_update | 2018-07-13 10:44:06 |
| depth | 1 |
| children | 0 |
| last_payout | 2018-07-20 10:44:06 |
| cashout_time | 1969-12-31 23:59:59 |
| total_payout_value | 0.000 HBD |
| curator_payout_value | 0.000 HBD |
| pending_payout_value | 0.000 HBD |
| promoted | 0.000 HBD |
| body_length | 164 |
| author_reputation | 28,704,887,249,463 |
| root_title | "Making a powered Z-Axis table for my K40 Laser Cutter - Holgamods Kit (Part 2)" |
| beneficiaries | [] |
| max_accepted_payout | 1,000,000.000 HBD |
| percent_hbd | 10,000 |
| post_id | 64,518,676 |
| net_rshares | 0 |
hiveblocks