![greenbridge.jpeg](https://cdn.steemitimages.com/DQmSy9m9hFKk9acbk8MZkxqtxfz1zM32fY2moYx64qKF7Me/greenbridge.jpeg)

  This is were I will be documenting my work in creating a DIY weather station for monitoring and recording my own local weather in southern Maine.  The goal of this project is to both build a weather station and to get ROS2 programming experience, so I will be utilizing other projects and advice to create my weather station and convert the code to ROS2.  

In this first blog post I will be going over the hardware chosen for the project.  This may not be a complete list yet as there are likely additional cables connectors and housings I will discover I need as the project continues.

![raspberrypi3.jpeg](https://cdn.steemitimages.com/DQmTgSzqzfvwviqSx1gmjasLJRKtrJn7Eh9camzWAt1ePdj/raspberrypi3.jpeg)

# Main Hardware and Sensors
- [Raspberry Pi](https://www.raspberrypi.org/products/): I will be using a Raspberry Pi3 model B because I already own it. This should be fine because it can use the equivalent of ubuntu 18.04 in raspbian.
- [BME280 Temperature, Humidity and Pressure Sensor](https://www.adafruit.com/product/2652)
- [UVA / UVB sensor](https://learn.adafruit.com/adafruit-veml6070-uv-light-sensor-breakout)
- [Ground Temperature Sensor](https://www.adafruit.com/product/381)
- [Wind / Rain Sensor](https://www.argentdata.com/catalog/product_info.php?products_id=145)

# Extras
- 2x 4.7k Ohm resistors
- bread board wires
- bread board
- [MCP3008 - 8-Channel 10-Bit ADC With SPI Interface](https://www.adafruit.com/product/856)

I followed an already existing [guide](https://projects.raspberrypi.org/en/projects/build-your-own-weather-station/1) to initially order the hardware and will probably use it as a reference to software construction as well.  I added the UVB / UVA sensor because I want to monitor the changing UVB levels as we go through Grand Solar Minimum.  That's all for now next post will be about installing ROS2 on the raspberry pi3.

If you're still reading don't forget to subscribe!